|
|
Upgrade and modification |
Field Service |
|
In-depth re-training |
Spare parts supply |
|
 Convert your MMI to the latest Windows Version |
It is absolutely recommendable to ….
modify your Windows from 3.1 to the latest version.
 Why ?
Simple. The video capture board for Windows 3.1 is no longer available
in the market.It takes a month or so to
get the system workable again once the current video
capture board fails.
Solution
Change the video capture board in advance and switch to the latest
MMI Windows version.
71 % of the Windows 3.1 MMI systems have been converted already.
Act now!
Check your MMI Windows version. If not sure, please make a contact to
our local agent or directly to KTS NOW.
Important for All Windows 3.1 MMI users !
If you are still using Windows 3.1, please read this NOW. |
| Enhance Cellophane Detection Capability |
For EBI and ASEBI users in the Bottling Sector
If still worrying about another market complaint
･･･
Solution
The quickest and least expensive means is
to add an special optical filter assembly.
It is applicable either to the base inspection or sidewall inspection.
Any influence to the existing detection capability ?
No. Not at all. Your current system remains unchanged even after the modification. |
| Keep the performance of your EBI/ASEBI as brand-new |
For EBI and ASEBI users
The lighting unit is one of the critical items to ensure a consistent performance.
Lighting source
The power of an old LED lighting unit can
gradually lower after long years of usage.
Solution
A new LED lighting source is always available
in our stock. Just contact to our local agent.
Our service technician implement the unit and
necessary adjustment at the site. |
| Switch to a Double Hard-disk PC |
for all PC Windows MMI users
Still worrying about a hard-disk trouble ?
Here's a quick solution
Why not
switch to a double hard-disk PC? Most of the troubles happen to the PC
is directly or indirectly connected to the hard-disk.
Until recently a single hard-disk PC was dominant, but nowadays things different.
A double hard-disk PC has become an realistic choice
to avoid an unexpected shut-down.
Solution
Just replace your existing single hard-disk PC with a double
hard-disk type.
It’s just a simple replacement applicable to every type of
PC in the inspection systems. |
| Total replacement of old control console |
If your machine is more than 10 years old, make sure
whether the electronics are still available
in the market.
Why ?
Because the life cycle of the electronics are getting more and more short.
Older parts are getting obsolete, and then terminated in production.
We' normally keep some as a stock even after the termination, there's a limit.
But there’s what you can do…
The only means to keep your machine running for another 10 years
without any worry ･･････ Just make a total replacement of the current
console with a new set of PCB and electronics.
Is it really cost justifiable ?
The point is that the mechanical handling system remains as it is. And
detection performance gets far better in most of the cases.
the replacement of the console doesn’t ask for any line modification.
Check the economical advantage as a total sense. |
 Field service
Preventive maintenance ････
the wisest, least expensive way
to ensure your quality products |
|
|
Free Audit report
easy to realize what to
do and till when to keep
the machine OK. |
Just call our local service base for request !
 Preventive maintenance
Performance test & hard- and software check up
Overhaul
Checkup, cleaning, and repair/replacement of parts
by dismantling and/or reassembling
Adjustment for new job change
Electrical & mechanical adjustment for new job
change
Audit service free of charge ( only in Korea )
Our experienced field technician visits your plant
to check your machine if every thing is OK. |
 In-depth training service
Maintain your machine is one thing
Maintain your quality staff, ･･･quite another |
What the program is like and
how benefits you ?
Down-to-earth practical skill
Get your staff pieces of hands-on skill rather than
book knowledge.
Educate newly assigned staff
Get your newly assigned staff basic "Dos and Don'ts"
Re-training for a new operational know-how
Motivate your staff and make
them more quality conscious. |
 Spare Parts Supply |
Please request for a preventive machine check-up.
We'll get you a list of recommendable spare parts list
for your selection. |
If you would like us to send you further information,
please fill in below and click the button that says send me the brochure.
The items with *mark are requisite.
|
|
